Power + Data for Samsung Galaxy devices
The Lava nSTS-PE: USB Ethernet Adapter connects Samsung Android tablets to both Ethernet and 10.4 Watts of charging power at the same time (data + power), via a single CAT5/5e/6 Ethernet cable connected to a PoE-enabled switch.
Secured Samsung Compatibility
The Lava nSTS-PE ethernet adapter & cable combo was developed with Samsung Knox in coordination with the Samsung Enterprise Alliance Program (SEAP). This adapter uses the Samsung SDK to provide government grade security for your Samsung Galaxy device.
Cable Included
The adapter connects to the Samsung Galaxy Tablet using an included, 40" long [1000mm] Male 90°- to - Male Micro B USB Charging cable (required and included). It supports 10/100 Ethernet networking and provides bandwidth up to 100 Mbps.
Fast Ethernet - Up to 100Mbps
This wired Ethernet connection is compatible with 10/100 PoE switches, and provides reliable LAN connectivity at up to 100Mbps!
Step by Step
Locate the nearest wall outlet (120-240V A/C) to your tablet mounting location. Plug in our
VidaPower PoE Switch to the outlet, and connect a standard CAT/Ethernet cable from your router to the switch's uplink port. Next, run the powered CAT5 cable to your tablet location (up to 600') and connect it to the CAT5 port on the Lava Power Adapter. Finally, connect your Micro USB charging cable to the Micro USB port of the Adapter, run your charging cable to your device and voila - we've connected your device to an A/C outlet up to 600' away! You're good!
VidaPower PoE Switch to the outlet, and connect a standard CAT/Ethernet cable from your router to the switch's uplink port. Next, run the powered CAT5 cable to your tablet location (up to 600') and connect it to the CAT5 port on the Lava Power Adapter. Finally, connect your Micro USB charging cable to the Micro USB port of the Adapter, run your charging cable to your device and voila - we've connected your device to an A/C outlet up to 600' away! You're good!
Just need power, with no Ethernet? Use our Power Injector & save!
There are three ways to power your Samsung Galaxy tablet or Android device. Option one is to use the original charging cable with A/C adapter plugged into a standard 120/240V wall outlet, which may mean installing an A/C outlet if not close enough to your project. Your second option includes this Lava Power Adapter and the optional Power Injector to bring power from any standard 120/240V wall outlet within 600', if we won't need wired Ethernet! This could save the time, expense, and headaches involved with installing a new outlet! (Yes, you can thank us later!)
Optional, High Wattage PoE Switch
If we need to charge multiple adapters, consider using our high-power, 60W Power-over-Ethernet (PoE) switch and enjoy sustained charging for up to (4) Lava adapters. A properly connected switch will provide reliable, wired Ethernet via the uplink connection!
Dimensions
Device is compatible with the following Samsung Android devices below. Does NOT provide power NOR Ethernet to iOS / iPad, Windows, other non-Samsung tablets, or non-Android devices.
Compatible Devices
Stock (unrooted) versions of:Samsung Galaxy Tab A (10.1″)***
Samsung Galaxy Tab S2 (8.0″, 9.7″)
Samsung Galaxy Tab E (9.6″)*
Samsung Galaxy Tab A (8.0″, 9.7″**)
Samsung Galaxy Tab 4 (8.0″, 10.1″)
Samsung Galaxy Tab S (8.4″, 10.5″)
Samsung Galaxy Tab Pro (10.1″, 12.2″)
Not Compatible with the Samsung Galaxy Tab A 7.0
The Tab S2 and Tab E require nSTS-** products built after 2016-04-12 (see Samsung Tablet Compatibility)
* Samsung Galaxy Tab E (9.6″) running Android ver 5.x.x and above. Non-North American 4.x.x versions may not work.
** Samsung Galaxy Tab A (9.7″) North American model requires a LAVA micro-USB cable length of 19″ (50cm) or less.
*** Samsung Galaxy Tab A (10.1″) North American model was tested with build MMB29K.T580UEU1APG1.
**** Samsung Galaxy Tab A (9.7″) Europe and UK models may not work with any cable length, Model SM-T555 with Build: LRX22G.T555XXU1AOJ1 does not work.
What's in the box
Lava Computer nSTS-PE: USB Ethernet Adapter with PoE (Data and Power)
Operation Instructions
Male 90° - Male Micro USB Charging cable
Requirements
CAT5 Ethernet Cable
